Distribution manifolds

Universal manifold

Universal manifold

In galvanized sheet metal, insulated on all sides. Interchangeable air inlet and inspection door. Pre-punched closed outlets to be opened on site according to the desired connection configuration. Supply including: 4x wall anchoring brackets sliding along external guides on the manifold body for installation at the correct height, 1x inlet reducer.

Universal manifold 4X DN 125 mm. 4x DN 75/90 mm straight front / 4x DN 75/90 mm perpendicular on the left side. / 4x DN 75/90 mm perpendicular to the right side. / 4x 75/90 mm perpendicular above

Universal manifold 8X DN 160 mm. 8x DN 75/90 mm straight front / 4x DN 75/90 mm perpendicular on the left side. / 4x DN 75/90 mm perpendicular to the right side. / 8x 75/90 mm perpendicular above

Universal manifold 12X DN 160 mm. 12x DN 75/90 mm straight front / 4x DN 75/90 mm perpendicular on the left side. / 4x DN 75/90 mm perpendicular to the right side. / 12x 75/90 mm perpendicular above

Universal manifold 15X DN 250 mm. 15x DN 75/90 mm straight front / 4x DN 75/90 mm perpendicular on the left side. / 4x DN 75/90 mm perpendicular to the right side. / 15x 75/90 mm perpendicular above

Corrugated tube start

Corrugated tube start

Male / female adapter for direct connection between manifold for round tubes and round tubes themselves. Equipped with internal end-of-stroke shapes for correct engagement and hooking. Supply including 2 sealing o-rings.

Corrugated pipe outlet / DN 75 mm. Attack: M/F

Corrugated pipe outlet / DN 90 mm. Attack: M/F

Dynamic flow regulator

Dynamic flow regulator

Dynamic constant flow limiter with self-adjusting variable inclination internal element. For direct installation inside the manifold / plenum outlets. Maintains the flow rate set by the front selector regardless of the position in the system and without the aid of external energy.

Dynamic flow regulator in PE / DN 80 mm. Operating range: 15-50m³/ h (step 5 m³/ h)

Dynamic flow regulator in PE / DN 125 mm. Operating range: 100-180 m³/ h

Dynamic flow regulator in PE / DN 125 mm. Operating range: 50-100 m³/ h

Static flow regulator

Static flow regulator

Static constant flow limiter with concentric internal elements. For direct installation inside the manifold / plenum outlets. Depending on the number of concentric discs that are removed, the passage section increases.

Static flow regulator in PE / DN 80 mm / Connection: M. Pack of 12 pcs., Price in € / pcs.

Anti-static and antibacterial round corrugated tube

Anti-static and antibacterial round corrugated tube

Highly flexible, double layer corrugated externally and smooth internally. Antiseptic and antibacterial treatment of the internal surface to ensure easy cleaning and high flow rates. For installation in caldana, in false ceilings or on walls. Operating temperature: -25 / + 60 ° C. Compressive strength according to EN ISO 9969:> 8 kN / m.

Antistatic and antibacterial corrugated hose / DN 75 mm / Bend radius: min 150 mm. Supplied in 50m spools, price in € / m

Antistatic and antibacterial corrugated hose / DN 90 mm / Bend radius: min 150 mm. Supplied in 50m spools, price in € / m

Sleeve

Sleeve

Female / female sleeve for coupling sections to round tubes. The internal end-stroke shapes prevent the tubes from being inserted too deeply. Additional external clips ensure a mechanical closure of the connection.

Sleeve for corrugated pipes in HDPE / DN 75 mm. Attack: F / F

Sleeve for corrugated pipes in HDPE / DN 90 mm. Attack: F/F

O-Ring

O-Ring

Ring seal for round tube. Thanks to the properties of the special construction material, no lubricants are required.

Sealing O-ring in EPDM / DN 75 mm. Pack of 10 pcs., Price in € / pcs.

Sealing O-ring in EPDM / DN 90 mm. Pack of 10 pcs., Price in € / pcs.

Plug

Plug

Blind sealing cap for hygienic protection of the interior of round tube systems.

Blind plug in PE / DN 75 mm. Pack of 5 pz., Price in € / pz.

Blind plug in PE / DN 90 mm. Pack of 5 pz., Price in € / pz.

Clip

Clip

Fixing clip for round corrugated pipes with simple coupling in plastic material.

PE / DN 75 mm fixing clip. Pack of 48 pcs., Price in € / pcs.

Insulating sheath for corrugated pipes

Insulating sheath for corrugated pipes

Insulating sheath in polyethylene produced by continuous extrusion and expansion. External protective coating. Color: Grey.

PEE insulating sheath / DN 75 mm / Operating temperature: +8/90 ° C / Degree of insulation: 0.038 W / mK / Bending radius: min 150 mm. Supplied in 15 m reels, price in € / m

PEE insulating sheath / DN 90 mm / Operating temperature: +8/90 ° C / Degree of insulation: 0,038 W/mK / Bending radius: min 150 mm. Supplied in 15 m reels, price in € / m

Steel plenum box

Steel plenum box

Guide channels for laying flush with the wall on 4 sides. Opening of the same on the 2 opposite sides for sliding grids with magnetic attachment. Supply including: 4x wall anchoring brackets sliding along external guides on the plenum body for installation at the correct depth, 2x reducer for magnetic attachment grids.

Plenum vent in galvanized sheet. Dimensions 300x200 mm. 1xDN125 hose connection: universal on all sides

Plenum vent in galvanized sheet. Dimensions 400x150 mm. 1xDN125 hose connection: universal on all sides

Recirculation suction plenum for HRW / HRD 30 / 15H and V and 50/25 H and V Dimensions 710x260 mm. 1xDN200 hose connection: universal on all sides

Recirculation suction plenum for HRW 60/15 H and V and 90/25 H and V and HRD 40/20 H and V and 60/30 H and V Dimensions 710x360 mm. 1xDN200 hose connection: universal on all sides

Universal isolated plenum box

Universal isolated plenum box

Universal plenum kit in EPP to be combined with the grille. Reduced depth for installation even on internal walls. Single plenum dimensions (lxhxp): 172x120x100 mm.

Universal nozzle kit / single plenum for multiple configurations / 1 + 1 + 1 + 1 Dn 75/90 mm / Dimensions: 130x80 mm. Attack: F.

Plenum rigido in ABS - Slim box

Kit plenum universale in ABS

Kit plenum universale in ABS con manicotti in polipropilene che prevedono il collegamento del tubo corrugato. Possibilità di regolazione della portata tramite apposite serrande inseribili all'interno dei manicotti.

Diffusore in ABS con 4 tappi, 1 ingresso tubo DN 75 mm con serranda staffe di installazione e coperchio.