Fittings

Joint with sealing gaskets

Joint with sealing gaskets

Male / male joint in steel coated with polyethylene. EPDM gaskets for sealing the couplings.

DN 125 mm. Attack: M/M

DN 160 mm. Attack: M/M

DN 200 mm. Attack: M/M

DN 250 mm. Attack: M/M

Sleeve

Sleeve

Female / female sleeve in galvanized steel in polyethylene.

Sleeve / DN 125 mm. Attack: F/F

Slevee / DN 160 mm. Attack: F/F

Sleeve / DN 200 mm. Attack: F/F

Sleeve / DN 250 mm. Attack: F/F

Reduction with sealing gasket

Reduction with sealing gasket

Symmetrical female / male reduction in polyethylene coated galvanized steel. EPDM gaskets for a perfect seal of the couplings.

Reduction with sealing gasket / DN da 160 a 125 mm. Attack: F/M

Reduction with sealing gasket / DN da 200 a 160 mm. Attack: F/M

Reduction with sealing gasket / DN da 250 a 200 mm. Attack: F/M

T branch with sealing gasket

T branch with sealing gasket

Male / male / male T branch in galvanized steel with EPDM gaskets for a perfect seal of the couplings with the minimum pressure drop.

T-branch with sealing gasket / DN 125 mm. Attack: M / M / M

T-branch with sealing gasket / DN 160 mm. Attack: M / M / M

T-branch with sealing gasket / DN 200 mm. Attack: M / M / M

T-branch with sealing gasket / DN 250 mm. Attack: M / M / M

Riduzione con guarnizione di tenuta M/M

Riduzione con guarnizione di tenuta M/M

Riduzione simmetrica maschio/maschio in acciaio zincato rivestito in polietilene. Guarnizioni in EPDM per una perfetta tenuta degli accoppiamenti.

Riduzione con guarnizione di tenuta / DN da 160 a 125 mm. Attacco: M/M

Riduzione con guarnizione di tenuta / DN da 200 a 160 mm. Attacco: M/M

Riduzione con guarnizione di tenuta / DN da 250 a 200 mm. Attacco: M/M